Geometric - Geometric - Plank - Characteristics wall, ceiling

Geometric - Plank for wall and ceiling

Structure: Veneer composed of end grain wood and wood with the grain veneers, glued onto one side of a substrate, with tongue and groove


Delivery: Filled and sanded 80-grit, per plank


Optional delivery: Acoustic, upon request


Available in: Birch, Beech, Oak, Pine, Pine/Ocoumé, Meranti, Ocoumé, Poplar, Deal


Combination of wood: Different combinations of kinds of wood are possible, upon request


Standard dimensions, l x w x t:
± 2400 x 160 x 17.5 (15 mdf + 2.5 Plexwood) mm


Optional dimensions: Upon request


Standard geometric veneer: Diagonal 15°, 30°, 45°, rectangle 0°/90° and herringbone +15°/-15°, +30°/-30°, +45°/-45°


Optional geometric veneer: Upon request


Standard edge: Without bevelled edge


Optional edge: With bevelled edge


General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that sanding, filling, cutting, gluing and finishing differs significantly from other wood products, follow the instructions of the products chosen, and see our general guidelines


Reference samples: Wood is a natural product, varying in composition, on this website displayed, requested and/or delivered samples are reference samples, requesting a production sample is recommended


Transport/storage: Avoid extreme swings in air humidity and temperature, at all times, allow Plexwood to acclimatize before processing, avoid exposure of unfinished Plexwood to direct sunlight, and avoid contact with penetrating fluids or substances


Colour fastness: Colour changes under the influence of sunlight are possible


Application possibilities: For the interior, as per the above specifications, Plank is mainly used for walls and ceilings


Technical specifications


Processing and finishing


Maintenance

The brand name Plexwood® is registered and the product is protected

Plexwood Facebook Plexwood Houzz Plexwood home