Panel one-sided - Characteristic wall, ceiling, furniture

Panel for wall, ceiling and furniture

Structure: Veneer composed of end grain wood and wood with the grain veneers, glued onto one side of a substrate

Delivery: Filled and sanded 80-grit, per panel

Available in: Birch, Beech, Oak, Pine, Pine/Ocoumé, Meranti, Ocoumé, Poplar, Deal

Combination of wood: Different combinations of kinds of wood are available, upon request

Standard dimensions, l x w x t:
± 2400 x 1200 x 14.5 (12 mdf + 2.5 Plexwood) mm
± 3000 x 1200 x 14.5 (12 mdf + 2.5 Plexwood) mm

Optional dimensions: l x w x t variable upon request and l > 2400 mm has staggered joints

Standard veneer: 0° long grain (l) = 2400 mm

Optional veneer: 90° cross grain (l) = 1200 mm, geometric patterns, diagonal 15°, 30°, 45°, square, rectangle, herringbone, parallelogram and trapezium based on veneer directions 0°/90°, +15°/-15°, +30°/-30°, +45°/-45°

Standard substrate: 12 mm mdf, low-formaldehyde E1 / mixed sources PEFC/FSC

Optional substrate: 3 / 4 / 4 + 4 / 6 / 9 / 12 + 12 / 12 + 12 + 12 / 15 / 15 + 15 / 15 + 15 + 15 / 18 / 18 + 18 / 18 + 18 + 18 mm mdf  or plywood E1, mdf or plywood CARB II compliant or mdf zero-added formaldehyde, mdf or plywood fire retardant (Euroclass B), mdf moisture resistant V313, colour-stained mdf (black, brown, yellow, orange, red, green, blue or grey), door- and sandwich panels, lightweight and maritime panels, please also see special substrates

Optional build-up: Panel one-sided in combination with a regular backing veneer of 2.5 mm ocoumé (not to be used as counter-balance, for a stable build-up please see Panel two-sided)

General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that sanding, filling, cutting, gluing and finishing differs significantly from other wood products, follow the instructions of the products chosen, and see our general guidelines

Reference samples: Wood is a natural product, varying in composition, on this website displayed, requested and/or delivered samples are reference samples, requesting a production sample is recommended

Transport/storage: Avoid extreme swings in air humidity and temperature, at all times, allow Plexwood to acclimatize before processing, avoid exposure of unfinished Plexwood to direct sunlight and avoid contact with penetrating fluids or substances

Colour fastness: The influence of sunlight can cause changes in colour

Application possibilities: For the interior, as per the above specifications, Panel one-sided is mainly used for walls, ceilings and furniture

The brand name Plexwood® is registered and the product is protected

Plexwood Facebook Plexwood Houzz Plexwood home