Panel two-sided - Technical specifications

Structure: Veneer composed of strips of approximately 1 to 3 mm veneer of end grain wood and wood with the grain, glued crosswise, of approximately 2.5 mm thickness (dividing wall, door, ceiling and furniture) or 4.5 mm thickness (staircases and podium, where the underside is visible), glued onto two sides of a substrate


Length: Maximum length 3000 mm, tolerance sawn 0.2 - 0.3 %


Width: Maximum width 1250 mm, tolerance sawn 0.2 - 0.3 %


Thickness: Maximum thickness 60 mm, tolerance sanded ± 0.2 - 0.3 mm


Squareness: ± 1 mm per meter


Density: Depending on the type of substrate, approximately 750 kg/m³ (mdf)


Stability: Of the applied mdf 12 mm according NEN-EN 318
In direction of length and width 0.2 %
In direction of thickness 5 %


Pull-out force of screw: Of the applied 12 mm mdf according NEN-EN 320
Surface 1400 N
Sides 1200 N


Tensile strength: Of the applied 12 mm mdf, according NEN-EN 319, is 0.8 N/mm²


Stability of shape: According to NEN-EN 1294 measured by the SHR RC 2115 with climate changes
Standard climate 20 ± 2 °C and 65 ± 5 % RH
Dry 23 ± 2 °C and 30 ± 5 % RH
Humid 23 ± 2 °C and 85 ± 5 % RH
Maximum distortion in mm:
mdf 2400 x 930 x 12 mm uncovered (reference), 4 mm
mdf 2400 x 930 x 12 mm covered with 3 mm Plexwood - Poplar, 13 mm
mdf 2400 x 930 x 12 mm covered with 3 mm Plexwood - Beech, 27 mm


Tensile strength: Measured perpendicularly according to NEN-EN 319 by the SHR RC 2115
Bonding of Plexwood 3 mm on 12 mm mdf > 1.01 N/mm², the glue used by Plexwood meets quality D4 according to NEN-EN 204


Wood properties: Wood is not static, has a high electrical resistance (1 - 1000 MΩ), and a small heat conductivity (0.11 - 0.16 W/m²K) of which the effect is that it slows down the spreading of fire (source: Wood Vademecum; Wood Centre Foundation [Hout Vademecum; Stichting Centrum Hout], Almere 2001, pages 46, 48)

The brand name Plexwood® is registered and the product is protected

Plexwood Facebook Plexwood Houzz Plexwood home